Error messages
Display message Cause/solution
Check LINE IN
R
The telephone line cord has not been
connected yet or not connected properly.
Check the connections (page 8).
Memory full
R
The call block list memory is full. Erase
unwanted entries (page 13).
R
The allow list memory is full. Erase unwanted
entries (page 14).
Not accepted
R
Invalid code or character is entered. Try again.
Requires
subscription
to Caller ID.
R
You must subscribe to a Caller ID service.
Once you receive caller information after
subscribing to a Caller ID service, this
message will not be displayed.
Troubleshooting
If you still have difficulties after following the instructions in this section,
disconnect the AC adaptor, then reconnect the AC adaptor.
General use
Problem
Cause/solution
The unit does not
work.
R
Check the connections (page 8).
R
Unplug the AC adaptor to reset the unit.
Reconnect the adaptor and try again.
The display is in a
language I cannot
read.
R
Change the display language (page 8).
16
For assistance, please visit http://shop.panasonic.com/support
Useful Information
PNQX8877ZA_0115_ver101.pdf 16
2019/01/15 17:09:23