15
Basic Operations
Multi-unit operation
*1 KX-TG7150/KX-TG7170 does not support conference call feature.
*2 After pressing
{x}
, the rest of this procedure must be completed within 1 minute.
*3 If you forget the base unit PIN, consult your nearest Panasonic service centre.
Feature
Operation
Intercom: calling
Example: When you call handset 1
{
INT
}
i
Press
{
1
}
(desired handset number).
L
When finished talking, press
{ih}
.
Intercom: answering
Press
{C}
/
{s}
.
L
When finished talking, press
{ih}
.
Transferring calls between
handsets
Example: When you transfer a call to handset 1
During an outside call, press
{
INT
}
.
i
Press
{
1
}
(desired
handset number).
i
When the handset 1 answered, press
{ih}
to complete transfer.
Conference calls
*1
(2 people can have a
conference call with an
outside party)
Example: When you make a conference call with handset 1
During an outside call, press
{
INT
}
.
i
Press
{
1
}
(desired
handset number).
i
When the handset 1 answered, press
{
3
}
to establish a conference call.
Manual registration
Handset:
{j
/OK
}
i
“
Handset Setup
”
i
{
>
}
i
“
Registration
”
i
{
>
}
i
“
Register H.set
”
i
{
>
}
Base unit:
Press and hold
{x}
on the base unit for about 3 seconds,
until the registration tone sounds.
*2
Handset:
Wait until “
Enter Base PIN
” is displayed, then enter the
base unit PIN (default: “
0000
”).
*3
i
{j
/OK
}
L
When the handset has been registered successfully,
w
will stop flashing.
Cancelling a handset
{j
/OK
}
i
“
Base Unit Setup
”
i
{
>
}
i
Enter
“
335
”.
i
“
Cancel Handset
”
i
{
>
}
i
Select the
handset(s) you want to cancel, by pressing the desired
handset number.
i
{j
/OK
}
i
“
Yes
”
i
{
>
}
i
{ih}
TGA715FX_717FX(e-e).book Page 15 Wednesday, February 28, 2007 2:47 PM
