6
• If all registered handsets start ringing, press the same button to stop.
Then repeat this step.
3
Handset:
Place the handset on the base unit.
• Continue the operation even when the handset display shows
“
Please Wait...
”
.
4
With the handset still on the base unit, wait until a confirmation tone sounds
and
w
stops flashing.
Note:
• If an error tone sounds, or if
w
is still flashing, register the handset according
to the base unit’s operating instructions.
• The KX-TG8301 does not feature an answering system.
• Answering system features are available only when this handset is registered
to the KX-TG8321.
For your safety
To prevent severe injury and loss of life/property, read this section carefully
before using the product to ensure proper and safe operation of your product.
WARNING
Power connection
• Completely insert the AC adaptor/power plug into the power outlet. Failure to
do so may cause electric shock and/or excessive heat resulting in a fire.
• Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it
from the power outlet, then wiping with a dry cloth. Accumulated dust may
cause an insulation defect from moisture, etc. resulting in a fire.
• Unplug the product from power outlets if it emits smoke, an abnormal smell, or
makes an unusual noise. These conditions can cause fire or electric shock.
Confirm that smoke has stopped emitting and contact an authorised service
centre.
Installation
• To prevent the risk of fire or electrical shock, do not expose the product to rain
or any type of moisture.
• Do not place or use this product near automatically controlled devices such as
automatic doors and fire alarms. Radio waves emitted from this product may
cause such devices to malfunction resulting in an accident.
CAUTION
Installation and relocation
• The AC adaptor is used as the main disconnect device. Ensure that the AC
outlet is installed near the product and is easily accessible.
TGA830FX(fx).book Page 6 Friday, April 4, 2008 10:37 AM
