Setting up
Connections/Wall mounting
Connect the AC adaptor to the power outlet.
Drive the screws (
1
) (not supplied) into the wall, if necessary.
2
27.2 mm (1
1
/
16
inches)
1
2
1
2
Note:
R
The AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
R
Make sure that the wall and the fixing method are strong enough to support the
weight of the unit.
Battery installation/Battery charging
When the language selection is displayed after installing the batteries for the first
time, you can select your desired language.
MbN
: Select the desired setting.
a
M
SAVE
N
a
M
OFF
N
Important:
R
Use the supplied rechargeable batteries. For replacement, we recommend using
the Panasonic rechargeable batteries noted in the base unit’s operating
instructions.
R
USE ONLY rechargeable Ni-MH batteries AAA (R03) size (
1
).
R
Do NOT use alkaline/manganese/Ni-Cd batteries.
R
Confirm correct polarities (
,
).
Charge for about 7 hours.
R
Confirm
“
Charging
”
is displayed (
2
).
For assistance, visit www.panasonic.ca/english/support
5
Installation
2911_TGDA59C (en-en)_ver002.pdf 5
12/9/2016 8:02:02 AM