*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“
Caller ID
”
. To turn this feature off, select
“
Manual
”
.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 14).
*4 The preset melodies in this product (
“
Ringtone 3
”
-
“
Ringtone 40
”
) are used with
permission of © 2012 Copyrights Vision Inc.
*5 If you do not want the unit to ring before the caller information is received, set to
“
Off
”
.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your service provider/telephone company.
*6 This setting is available when you have the key finder (KX-TGA20EX). Read the installation
manual for more information on the key finder.
*7 For models with supplied key finders, the display shows
“
1:Finder1
”
.
*8 If you register 2 or more key finders.
*9 If you have 2 or more key finders.
*10 This menu is not displayed when repeater mode is set to
“
On
”
.
*11 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*12 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*13 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*14 This menu icon is displayed when the key finder is not registered.
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R
Make sure the unit’s date and time setting
is correct (page 14).
1
M
MENU
N#720
2
Select an alarm by pressing
1
to
3
.
a
M
OK
N
3
MbN
: Select the desired alarm option.
a
M
OK
N
“
Off
”
Turns alarm off. Go to step 9.
“
Once
”
An alarm sounds once at the set time.
“
Daily
”
An alarm sounds daily at the set time.
Go to step 5.
“
Weekly
”
Alarm sounds weekly at the set time(s).
4
Proceed with the operation according to
your selection in step 3.
n
Once:
Enter the desired date and month.
a
M
OK
N
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
29
Programming
TGE2xxE_(en_en)_0307_ver.030.pdf 29
2014/03/07 15:08:32