Sub-menu 1
Sub-menu 2
Settings
Code
Time Adjustment
*2,
–
Caller ID
<
Manual
>
#226
–
*1 KX-TGH220 series: page 3
*2 If you program these settings using one of the handsets, you do not need to program the
same item using another handset.
*3 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*4 This setting is available when you have the key finder (KX-TGA20EX). Read the installation
manual for more information on the key finder.
*5 KX-TGH210 series: page 3
*6 KX-TGH220 series: this menu icon is displayed when the key finder is not registered.
*7 KX-TGH210 series: this menu icon is displayed when the key finder is not registered.
*8 You can select to display either a single item or multiple items on one screen at a time for
the handset menu list, recorded message list, phonebook list, caller list, and redial list. When
in multiple items display mode, you can switch the screen to confirm the detailed information
by:
– pressing
M
N
, or
– pressing
M
N
a
MbN
:
“
Detail
”
a
M
OK
N
*9 You can set the handset display backlight while on charge.
–
“
On
”
: Backlight is on (dimmed).
–
“
Off
”
: Backlight turns off after 10 seconds of charging.
*10 The preset melodies in this product (
“
Ringtone 3
”
-
“
Ringtone 40
”
) are used with
permission of © 2012 Copyrights Vision Inc.
*11 If you do not want the unit to ring before the caller information is received, set to
“
Off
”
.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your service provider/telephone company.
*12 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“
Caller ID
”
. To turn this feature off, select
“
Manual
”
.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 12).
*13 For models with supplied key finders, the display shows
“
1:Finder1
”
.
*14 If you register 2 or more key finders.
*15 If you have 2 or more key finders.
*16 This menu is not displayed when repeater mode is set to
“
On
”
.
*17 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*18 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*19 To prevent other users from joining your conversations with outside callers, turn this feature
on.
28
Programming
TGH21x22xBX_UE_ver021.pdf 28
2014/07/31 15:43:47