2
Use the handset as normal.
R
Refer to your neckloop’s operating instructions for details.
R
If your neckloop does not have a microphone, speak into the
handset’s microphone.
R
You can use volume booster (page 15), speech booster
(page 17), tone control (page 14), and other features even when
using a neckloop.
Setting the headset type
Set this setting to match the type of device connected. This feature can
be set for each unit.
“
Headset
”
(default): Disables the handset’s microphone. The
connected headset is used for talking and listening.
“
Neckloop with Mic
”
: Disables the handset’s microphone. The
connected neckloop is used for talking and listening.
“
Neckloop w/o Mic
”
: Enables the handset’s microphone. The
connected neckloop is used for listening only.
1
M
MENU
N#786
2
MbN
: Select the desired setting.
a
M
SAVE
N
a
M
OFF
N
One-touch ringer off
Handset
Press and hold
0
until the handset beeps to turn the ringer off. While
the ringer is turned off, the handset will not ring for calls.
R
You can turn the ringer on again by pressing and holding
0
until the
handset beeps.
Memory dial
For easy dialing, you can assign a phone number to each dial key (
1
to
9
) on the handset. All memory dial entries can be used by any handset.
20
For assistance, please visit http://shop.panasonic.com/support
Accessibility
TGMA44_45(en)_0606_ver101.pdf 20
2016/06/06 16:11:27
