Value Range
3–50 (
´
10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than
[Initial Delay]
–
This value must be greater than
[Minimum Delay]
–
[Initial Delay]
must be greater than or equal to
[Minimum
Delay]
Default Value
20 (
´
10 ms)
Configuration File Reference
Minimum Delay
Description
Specifies the minimum delay, in 10-millisecond units, of the jitter buffer.
Value Range
1 or 2 (
´
10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be less than or equal to
[Initial Delay]
–
This value must be less than
[Maximum Delay]
–
[Maximum Delay]
must be greater than
[Initial Delay]
Default Value
2 (
´
10 ms)
Configuration File Reference
Initial Delay
Description
Specifies the initial delay, in 10-millisecond units, of the jitter buffer.
Value Range
1–7 (
´
10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than or equal to
[Minimum
Delay]
–
This value must be less than
[Maximum Delay]
Default Value
2 (
´
10 ms)
Configuration File Reference
3.6.4.4 DTMF
DTMF Type
Description
Selects the method for transmitting DTMF (Dual Tone Multi-Frequency)
tones.
100
Administrator Guide
Document Version 2013-02
3.6.4 VoIP Settings [Line 1]–[Line 8]
Summary of Contents for KX-TGP500
