Panasonic KX-TGP500 Administrator'S Manual Download | Manualshive

Page: 2 / 284

background image

Introduction

This Administrator Guide provides detailed information on the configuration and management of this unit. This
Administrator Guide is available on the Panasonic Web site at:

http://panasonic.net/pcc/support/sipphone/

Audience

This Administrator Guide contains explanations about the installation, maintenance, and management of the
unit and is aimed at network administrators and phone system dealers.
Technical descriptions are included in this guide. Prior knowledge of networking and VoIP (Voice over Internet
Protocol) is required.

Related Documentation

Related documentation includes the Quick Guide and the User Guide. Refer to these guides when needed.

•

Quick Guide:

Explains basic information about the installation and operation of the unit. This guide is

provided with the unit or on the Panasonic Web site at:

http://panasonic.net/pcc/support/sipphone/

•

User Guide:

Explains necessary information for end users to operate and customize the unit. This guide

is provided on the Panasonic Web site at:

http://panasonic.net/pcc/support/sipphone/

Technical Support

When technical support is required, contact your phone system dealer.

Trademarks

•

Microsoft, Excel, Internet Explorer, Outlook, Windows, and Windows Vista are either registered trademarks
or trademarks of Microsoft Corporation in the United States and/or other countries.

•

Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both.

•

All other trademarks identified herein are the property of their respective owners.

•

Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.

NOTES

•

The screen shots shown in this guide are provided for reference only, and may differ from the screens
displayed on your PC.

•

The languages of messages displayed on the unit may differ depending on the country/area of use.

2

Administrator Guide

Document Version 2013-02

Introduction

«
1
2
3
4
...
»

Summary of Contents for KX-TGP500





























































































































































































































































































Reviews:

No comments

Related manuals for KX-TGP500

NoizeBarrier Range SA

Brand: Otto Pages: 12

Brand: EDIFIER Pages: 22

Brand: ACME Pages: 96

Brand: J&M Pages: 10

Brand: Plantronics Pages: 1

Brand: SoundPeats Pages: 6

Brand: Jabra Pages: 35

Brand: ASKA ELECTRONICS Pages: 2

Brand: Flow Pages: 23

Brand: Hisense Pages: 11

Brand: Hisense Pages: 11

Brand: Delton Pages: 8

Yealink SIP-T28P

Brand: Yealink Pages: 506

Brand: Plantronics Pages: 7

Brand: Plantronics Pages: 10

Brand: Pluto Pages: 11

Brand: A&E Trading Pages: 5

Brand: Polaris Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands