Value Range
6–16 characters (except ", &, ', :, <, >, and space)
Default Value
adminpass
Configuration File Reference
Confirm New Password
Description
Specifies the same password that you entered in
[New Password]
for
confirmation.
Value Range
6–16 characters (except ", &, ', :, <, >, and space)
Note
•
This value must be the same as the value entered in
[New
Password]
.
Default Value
adminpass
Configuration File Reference
3.5.3 Change User Password
This screen allows you to change the password used to authenticate the User account when logging in to the
Web user interface.
Note
•
For security reasons, the characters entered for the password are masked by special characters, which
differ depending on the Web browser.
•
After you change the user password, the next time you access the Web user interface, the
authentication dialog box appears. 2 consecutive login failures will result in an error ("401
Unauthorized"). This restriction only applies the first time you attempt to log in after changing the
password. In all other circumstances, an error occurs after 3 unsuccessful login attempts.
3.5.3.1 Change User Password
New Password
Description
Specifies the password to use to authenticate the User account when
logging in to the Web user interface.
Value Range
6–16 characters (except ", &, ', :, <, >, and space)
Document Version 2013-02
Administrator Guide
79
3.5.3 Change User Password
Summary of Contents for KX-TGP500
