Default Value
Not stored.
Note
•
When a user logs in to the Web user interface for the first time,
after clicking
OK
on the authentication dialog box, the
[Change
User Password]
screen is displayed automatically to make the
user set a password.
Configuration File Reference
Confirm New Password
Description
Specifies the same password that you entered in
[New Password]
for
confirmation.
Value Range
6–16 characters (except ", &, ', :, <, >, and space)
Note
•
This value must be the same as the value entered in
[New
Password]
.
Default Value
Not stored.
Configuration File Reference
3.5.4 Web Server Settings
This screen allows you to change the Web server settings.
3.5.4.1 Web Server Settings
Web Server Port
Description
Specifies the port number used by the Web server.
Value Range
80, 1024–49151
Note
•
You cannot specify here the same port number as any of the
port numbers specified for the individual lines in
[Source
Port]
80
Administrator Guide
Document Version 2013-02
3.5.4 Web Server Settings
Summary of Contents for KX-TGP500
