Temporary Confidential
Setting Up
12
Setting up the handset
Connecting the charger
L
Use only the supplied Panasonic AC adaptor
PQLV224.
Battery installation
L
USE ONLY Ni-MH batteries AAA (R03) size.
L
Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
L
Confirm correct polarities (
S
,
T
).
Battery charge
Charge for about 6 hours.
L
When the batteries are fully charged, the charge
indicator goes off.
Note when setting up
Note for connections
L
The AC adaptor must remain connected at all
times. (It is normal for the adaptor to feel warm
during use.)
L
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-
mounted AC outlet, as the weight of the adaptor
may cause it to become disconnected.
L
The unit will not work during a power failure.
Note for battery installation
L
Use the supplied rechargeable batteries. For
replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 4.
L
Wipe the battery ends (
S
,
T
) with a dry cloth.
L
Avoid touching the battery ends (
S
,
T
) or the
unit contacts.
Note for battery charge
L
It is normal for the handset to feel warm during
charging.
L
Clean the charge contacts of the handset and
charger with a soft and dry cloth once a month.
Clean more often if the unit is exposed to
grease, dust, or high humidity.
(120 V AC, 60 Hz)
Hooks
Rechargeable Ni-MH ONLY
Confirm
“
Charging
”
is displayed.
TGP500_550_04_QG(E).book Page 12 Tuesday, February 17, 2009 4:59 PM
