Programming through the Web User Interface
39
Document Version 2011-03
Programming through the
Web user interface
You can program the following features through
the Web user interface. The password is required.
Contact your administrator for further information.
– Network settings
– Call forward (page 28, 35)
– Do not disturb (page 29, 36)
– Block anonymous calls (page 29, 36)
– Call block
– Anonymous calls (Block Caller ID) (page 30, 37)
– Updating the base unit software
*1 This feature is explained as “Call Rejection
Phone Numbers” in the Web user interface.
*2 This feature is explained as “Firmware Update”
in the Web user interface.
Embedded Web
You need to activate the Web user interface every
time you program features using a computer. The
Web user interface is deactivated after setting on
the computer.
The default setting is
“
Off
”
.
1
{
MENU
}
(center of joystick)
i
{#}{
5
}{
3
}{
4
}
2
{V}
/
{^}
: Select the desired setting.
3
{
SAVE
}
i
{
OFF
}
1
{
MENU
}
(middle soft key)
i
{#}{
5
}{
3
}{
4
}
2
{V}
/
{^}
: Select the desired setting.
3
{
SAVE
}
i
{
EXIT
}
Y
Handset
:
Base unit
