Intercom Features
46
Document Version 2011-03
Transferring calls
Outside calls can be transferred between the
handset and base unit.
1
During an outside call, press
{
MENU
}
.
2
{V}
/
{^}
:
“
Intercom
”
i
{
SELECT
}
3
{V}
/
{^}
: Select the base unit.
i
{
CALL
}
4
Wait for the paged party to answer.
L
If the paged party does not answer, press
{C}
to return to the outside call.
5
{
OFF
}
1
During an outside call, press
{
j
}
–
{
k
}
or
{
ALL
}
.
2
Wait for the paged party to answer.
L
If the paged party does not answer, press
the same button as in step 1 to return to the
outside call.
3
Place the corded handset on the cradle.
Transferring a call without speaking to the
other handset or base unit user
1
Perform from step 1 to 3, “Transferring calls”,
page 46.
2
{
OFF
}
L
The outside call rings at the other unit.
1
During an outside call, press
{
j
}
–
{
k
}
or
{
ALL
}
.
2
Place the corded handset on the cradle.
L
The outside call rings at the other unit.
Note for handset and base unit:
L
If the other handset or base unit user does not
answer the call within 1 minute, the call rings at
your unit again.
Answering a transferred call
Press
{C}
to answer the page.
Lift the corded handset or press
{
SP-PHONE
}
to
answer the page.
Note for handset and base unit:
L
After the paging party disconnects, you can talk
to the outside caller.
Handset locator
You can locate a misplaced handset by paging it.
1
Base unit:
{
ALL
}
L
All registered handsets beep for 1 minute.
2
To stop paging:
Base unit:
Press
{
ALL
}
.
Handset:
Press
{C}
, then press
{
OFF
}
.
Y
Handset
:
Base unit
Y
Handset
:
Base unit
Y
Handset
:
Base unit
