F
Monitoring
66
For assistance, please visit http://www.panasonic.com/phonehelp
Selecting the sharpness of images to
be stored by the cordless camera
You can select the desired sharpness of
images that the cordless camera stores at
the time of detection.
1
Access the cordless camera (page 57).
2
Click
[Setup]
tab at the top of the page.
3
Click
[Sensor Options]
.
4
Select the desired sharpness for
“
Sharpness
” (Default: “
Standard
”),
then click
[Save]
.
Settings for your network
Normally you should check
[Auto]
. If you
need to assign a specific IP address and
subnet mask, check
[Static]
, then enter
the IP address and subnet mask you wish
to assign to the cordless camera. Refer to
the included “Installation Guide for MULTI
TALK V software” for IP address setting.
1
Access the cordless camera (page 57).
2
Click
[Setup]
tab at the top of the page.
3
Click
[Network Settings]
.
4
Select the desired setting. (Default:
“
Auto
”)
L
If you check “
Auto
”, skip to step 6.
5
Enter a valid IP address and subnet
mask.
6
Click
[Save]
.
About help page
You can access help information for each
operation by clicking the
[Help]
tab of the
web browser.
Your computer
Your computer
