28
For assistance, please visit http://www.panasonic.com/phonehelp
Storing Names and Phone Numbers in
Phonebook
You can store up to 50 names and phone numbers in memory.
Make sure that the handset is on the cradle and the SP-PHONE/
HEADSET indicator light is off.
1
Press
[FUNCTION/EDIT]
.
2
Press
[OK]
(
Yes
key).
3
Enter a name, up to 15 characters with
the dialing buttons
[0]
to
[9]
,
[
£
]
and
[#]
(p. 29).
• To move the cursor, press
[
2
]
or
[
1
]
.
• If a name is not required, go to step 4.
4
Press
[OK]
(
Next
key).
5
Enter a phone number up to 32 digits.
• If you enter a wrong number, press
[ERASE]
and enter the correct number.
• If you want to change the storing name,
press
[
3
]
to reach the desired display
.
6
Press
[OK]
(
Save
key).
• The entered name and phone number are
displayed.
• The display will return to step 1.
• If the display shows “
Phonebook full
” in step 2, press
[EXIT]
to exit the list. To
erase other stored items from the Phonebook, see page 33.
• You can exit the programming mode any time by pressing
[EXIT]
.
• If a pause is required for dialing, press
[PAUSE]
where needed. If required, you
can also store
[FLASH]
in a phone number. Pressing
[PAUSE]
or
[FLASH]
counts as one digit (p. 36, 38).
To store an emergency number (#):
Emergency numbers are numbers stored in the Phonebook that can be dialed even
when the Call Restriction (p. 40) is set to ON.
To store a number as an emergency number, add # at the beginning of the name in
step 3.
Save phonebook ?
34
[OK]=Yes
Phonebook
10 items
Enter name
Tom Jones
4
[OK]=Next
Enter phone No.
3
0987654321
3
[OK]=Save
Tom Jones
0987654321
Phonebook
TS600W.book Page 28 Friday, October 28, 2005 2:10 PM