Special Features
26
FLASH Button
Pressing
[FLASH]
allows you to use special features of your host PBX
such as transferring an extension call or accessing special telephone
services (optional) such as call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX. You can
select the following flash times: “80, 90, 100, 110, 200, 250, 300, 400, 600,
700 ms (milliseconds)”. Your phone comes from the factory set to “100 ms”.
Make sure that the handset is on the cradle.
1
Press
[FUNCTION/EXIT]
.
2
Scroll to “
SET FLASH TIME ?
” by
pressing
[ ]
or
[ ]
.
3
Press
[ENTER]
.
4
Select the desired time by pressing
[ ]
or
[ ]
.
5
Press
[ENTER]
.
• The display will return to step 2. To exit
the programming mode, press
[FUNCTION/EXIT]
or wait for
60 seconds.
• You can exit the programming mode any time by pressing
[FUNCTION/EXIT]
.
• If the unit is connected via a PBX, PBX functions (transferring a call, etc.) might
not work correctly. Consult your PBX supplier for the correct setting.
SET FLASH TIME ?
<
<
FLASH TIME 100MS
/ /
<
<
STORED