31
Useful Inf
ormation
If “
” flashes, the battery power is low. Install new batteries as soon as
possible.
1
Disconnect the telephone line
cord from the unit.
2
Press down in the direction of the
arrow and remove the cover (
).
3
Replace the batteries with new
ones using correct polarity (+, –)
(
), and close the cover.
4
Connect the telephone line cord
to the unit.
• After the battery replacement, the information stored in the Caller List and the
Redial List will be cleared. Store the desired item in the Speed Dial List.
• The time will be shown as “
12:00
AM
1/1
” or “
0:00 1/1
” after replacing the
batteries, readjust the time.
Battery Precautions:
The batteries should be used correctly, otherwise the unit may be damaged by
battery leakage.
—Do not mix different types of batteries.
—Do not charge, short-circuit, disassemble, heat or dispose of in fire.
—Remove all the batteries when replacing.
Note:
— If you do not install the batteries or if the battery power is low, the time and
date will be shown as “
12:00
AM
1/1
” or “
0:00 1/1
”. Readjust the time
and date after the battery replacement.
— Replace all the batteries every six months if using Alkaline batteries, or
misoperation may occur. (When you use Manganese batteries, replace all of
them every three months.)
— Do not use nickel-cadmium batteries.
+
-
-
+
+
-
1
2
1
2
Battery Replacement