4.4 KX-TD Series PBX Programming for DPT Integration
110
Installation Manual
c)
Enter
the system number (
[0]
or
[1]
, master/slave). The PBX displays the ROM version and
the date it was created.
2.
Set
the date and time using System Program
[000]
.
3.
Set
PBX extension numbering using System Program
[003]
.
4.
Assign
the
Voice Mail port
. This program tells the PBX which jack will be connected to the VPS.
This allows the PBX to send the proper DPT Integration information to those ports.
Note
•
You can assign a maximum of 6 jacks (12 ports) with the KX-TD816 and KX-TD1232.
•
If you are configuring a 2-cabinet system, all Voice Mail Ports should be assigned to either
the Master or Slave System.
From the
SYS-PGM NO ?
screen:
a)
Enter [117].
b)
Press
the
NEXT
button (SP-PHONE).
Screen output: M:
c)
Enter
the jack number
(02-64)
of the port you will use for the Voice Mail.
d)
Press
the
STORE
button.
e)
Press END
(HOLD) when finished.
5.
Follow this step if you are setting flexible numbering. If you are not setting flexible numbering,
continue from step 6.
Voice Mail Extension Number Assignment is automatically set. Use System Program [118]
or [127] to assign an extension number to each Voice Mail port. Because each jack
connected to the VPS provides 2 extensions, this enables you to assign extension numbers
to each port. You can assign any extension number that is not already assigned to another
port. To reach the VPS, users dial these extension numbers. It is not necessary to change
the default programming for the extensions 165 and 166 (or 265 and 266).
From the
SYS-PGM NO ?
screen:
a)
Enter [118].
b)
Press
the
NEXT
button (SP-PHONE).
Screen output: VM NO?
c)
Press
the
NEXT
button (SP-PHONE).
Screen output: VM-01:#_ _ -1: 165
_ _ = the port number you entered in program 117
d)
Enter
the
Extension Number
that you want this port to have.
The default extension number for port 1: 165; port 2: 166
e)
Press
the
STORE
button.
f)
Repeat steps c, d, and e until all extension numbers are entered.
Conditions:
Jack 01 cannot be used as a Voice Mail port. A jack
programmed as a Manager Extension (System
Program [006]) cannot be used in this program.
Summary of Contents for KX-TVA594
