3.2 Message Manager's Guide
94
Feature Manual
7.
Enter
the
extension number
.
8.
The VPS announces the current extension setting.
Press [2]
to accept it.
9.
Repeat steps 6-8 to assign or to delete the extension number for the Day, Night, Lunch and Break
Modes for each operator.
10.
The VPS announces the current Telephone number 1 setting.
Press [1]
to change or assign the
telephone number.
Press [2]
to accept the current setting—
Go to Step 13
.
11.
Enter
the
telephone number
using "0-9" and " ".
Note
•
Please make sure you begin the telephone number with a Trunk Access number (to seize a
trunk).
•
When connected to the KX-TD500 or the KX-TDA series, the maximum number of
characters allowed to be entered is 24; when connected to any other KX-T series PBX, 16.
12.
The VPS announces the current telephone number 1 setting.
Press [2]
to accept it.
13.
The VPS announces the current telephone number 2 setting.
Press [1]
to change or assign the
telephone number.
Press [2]
to accept the current setting.
14.
Enter
the
telephone number
using "0-9" and " ".
15.
The VPS announces the current telephone number 2 setting.
Press [2]
to accept it.
Summary of Contents for KX-TVM50
