4.4 LAN Settings
Getting Started
47
4.4
LAN Settings
To program the VPS over a LAN connection or to use E-mail Integration features, the VPS must first
be connected to the LAN and programmed accordingly.
Programming the VPS for LAN access
1.
Connect the PC to the VPS via USB (refer to 2.9 Connecting the VPS to a PC or LAN).
2.
Start KX-TVM Maintenance Console and connect to the VPS via USB (refer to 4.2 Starting KX-
TVM Maintenance Console).
3.
Click
Utility
in the menu bar.
4.
Select
LAN Settings
.
5.
Enter the appropriate settings for the IP address, subnet mask, default gateway, and port in the
LAN Settings dialogue box.
6.
Click
OK
.
Note
•
The port number setting can usually be left unchanged.
•
Consult the LAN administrator for the appropriate settings.
•
The VPS must be restarted after these settings are changed in order for them to take effect.
Accessing the VPS over the LAN
1.
Start KX-TVM Maintenance Console.
2.
From the
Connect
menu, select
LAN (TCP/IP)
.
3.
Enter the password used to log on to KX-TVM Maintenance Console and the IP address
assigned to the VPS.
4.
Click
Next
, then click
Finish
when the connection is completed.