manualshive.com logo in svg

Panasonic KX-TVS75, Installation Manual

The Panasonic KX-TVS75 user manual is essential for utilizing the full potential of this exceptional product. Ensure that you have every piece of information required to make the most of your device by downloading the free subscriber's manual from our website.

Share
Download
background image

5.1

STARTING UP

104

CUSTOMIZING THE SYSTEM

5.

Port Service Setting

Screen output:

Incoming Call Services for all ports (Day/Night) can be defined by this setting. Default 
values for all ports (Day/Night) are "Automated Attendant Service (Custom 1)." To 
select other incoming call services, go to "Setting Ports."

6.

Password Setting

Screen output:

You can assign the System Administrator Password and System Reset/Clear Password 
in this screen, if necessary.

To go to the next screen without assigning the password, 

Press ENTER

.

All ports are currently set up to handle callers with standard Automated Atten-
dant operation, day and night mode, using the Custom Service feature (Custom 
1).  You can change the operation to standard Voice Mail (Custom 2) or leave it 
as Automated Attendant.  If necessary, Custom 1 and Custom 2 can be modified 
under the menu 'Program -> Service Setting -> Custom Service.'

 Day Mode

Night Mode

Auto. Attend.
Auto. Attend.
Auto. Attend.
Auto. Attend.
Auto. Attend.
Auto. Attend.
Auto. Attend.
Auto. Attend.
Auto. Attend.
Auto. Attend.
Auto. Attend.
Auto. Attend.

Auto. Attend.
Auto. Attend.
Auto. Attend.
Auto. Attend.
Auto. Attend.
Auto. Attend.
Auto. Attend.
Auto. Attend.
Auto. Attend.
Auto. Attend.
Auto. Attend.
Auto. Attend.

A: Auto. Attend., V: Voice Mail, S: Next Screen

Auto. Attend. (using Custom 1), Voice Maii (using Custom 2)

Quick Setup- Port Service Setting

PORT 1
PORT 2
PORT 3
PORT 4
PORT 5
PORT 6
PORT 7
PORT 8
PORT 9
PORT 10
PORT 11
PORT 12

Quick Setup-Password Setting
              System Administrator Password
              (Maximum 8 characters)
                        NEW PASSWORD : =
                        VERIFICATION : =
              System Reset/Clear Password
              (Maximum 8 characters)
                        NEW PASSWORD : =
                        VERIFICATION  : =

Summary of Contents for KX-TVS75































































































































































































































































































































Reviews:

No comments

Related manuals for KX-TVS75

Brands by name

Popular brands

Load more brands