C3
SETTING COS (CLASS OF SERVICE) PARAMETERS
252
SYSTEM MANAGER'S GUIDE
4.
Type
the
Class of Service Number (1-64).
5.
For the parameters listed on the previous page - as each parameter is played:
a)
Press [1]
to change the current setting.
b)
Confirm the entry is correct and
Press [2]
to accept it.
6.
Enter the Intercom Paging Group Number (1-8).
a)
The current setting is played.
Press [1]
to change the current number.
b)
Type
the
Group Number (1-8).
c)
Confirm the entry is correct and
Press [2]
to accept it.
7.
Enter the Subscriber Service Prompt Mode.
a)
The current setting is played.
Press [1], [2], or [3]
to change the desired mode.
•
[1] System Prompt
•
[2] User 1 Prompt
•
[3] User 2 Prompt
b)
Confirm the entry is correct and
Press [4]
to accept it.
8.
Enter the Message Notification Status.
a)
The current setting is played.
Press [1]
to change the setting (enable or disable). If the
Message Notification Status is [Enable], go to step 8 b) below.
b)
Press [1], [2], [3], [4], or [5]
to choose the desired Beeper Callback No.
•
[1] Caller Select Mode
•
[2] Without message mode
•
[3] Before message recording mode
•
[4] After message recording mode
•
[5] Disable All Entry Mode (Caller cannot access beeper)
c)
Confirm the entry is correct and
Press [6]
to accept it.
d)
The current setting of MWL Notification for Unreceived Message is played.
Press [1]
to change the setting (enable or disable).
e)
Confirm the entry is correct and
Press [2]
to accept it.
f)
The current setting of Device Notification for Unreceived Message is played.
Press [1]
to change the setting (enable or disable).
g)
Confirm the entry is correct and
Press [2]
to accept it.
9.
Enter the External Message Delivery Status.
a)
The current setting is played.
Press [1]
to change the setting (enable or disable). If the
External Message Delivery Status is enabled, set the prompt mode for Receiving
External Delivery Messages.
b)
Press [1], [2], [3], or [4]
to choose the desired mode or
Press [5]
to accept it.
•
[1] System Prompt
Summary of Contents for KX-TVS75
