Panasonic KX-TVS80 Installation Manual Download

Page: 310 / 416

SYSTEM MANAGER'S GUIDE

310

Installation Manual

Intercom Paging Group Number

Subscriber Service Prompt Mode

Remote Call Forward to CO

Delete Message Confirmation

Number of Caller IDs for Personal Caller Name Announcement

17.

The current setting plays. Press [1] to change the current number.

Type the group number (1-9; with the KX-TVS50) or (1-17; with the KX-
TVS80).

Confirm the entry is correct and Press [2] to accept it.

Note
If set to "9 (Group 9)" (with the KX-TVS50) or "17 (Group 17)" (with the KX-
TVS80), the Intercom Paging feature is activated for all groups.

18.

The current setting plays. Press [1], [2], or [3] to change the desired mode.

•

[1] System Prompt

•

[2] User 1 Prompt

•

[3] User 2 Prompt

Confirm the entry is correct and Press [4] to accept it.

19.

The current setting plays. Press [1] to change the setting (enable or disable).

Confirm the entry is correct and Press [2] to accept it.

20.

The current setting plays. Press [1] to change the setting (enable or disable).

Confirm the entry is correct and Press [2] to accept it.

21.

The current setting plays. Press [1] to change the current number.

Type the number of Caller IDs (0-30).

Confirm the entry is correct and Press [2] to accept it.

All manuals and user guides at all-guides.com

Summary of Contents for KX-TVS80

































































































































































































































































































































































































































Search results

Summary of Contents for KX-TVS80

Reviews:

Related manuals for KX-TVS80

Brands by name

Popular brands

Panasonic KX-TVS80, Installation Manual

Search results

Summary of Contents for KX-TVS80

Reviews:

Related manuals for KX-TVS80

Brands by name

Popular brands