HOST_NAME
Value Format
String
Description
Specifies the host name for the unit to send to the DHCP server.
Note
•
This setting is available only when "
CONNECTION_TYPE
" is set
to "
1
".
Value Range
Max. 63 characters
Note
•
An empty string is not allowed.
•
If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
Default Value
{MODEL}
Web User Interface Reference
DHCP_DNS_ENABLE
Value Format
Boolean
Description
Specifies whether to receive DNS server addresses automatically or to
assign a DNS server addresses (up to 2) manually.
Note
•
This setting is available only when "
CONNECTION_TYPE
" is set
to "
1
" and when "
NW_SETTING_ENABLE
" is set to "
N
".
Value Range
•
Y
(Use "
USER_DNS1_ADDR
" or, "
USER_DNS1_ADDR
" and
"
USER_DNS2_ADDR
")
•
N
(Receive DNS server address automatically)
Default Value
N
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 19)
Web User Interface Reference
STATIC_IP_ADDRESS
Value Format
String
Description
Specifies the IP address for the unit.
Note
•
This setting is available only when "
CONNECTION_TYPE
" is set
to "
0
" and when "
NW_SETTING_ENABLE
" is set to "
N
".
•
When you specify this parameter, you must specify
"
STATIC_SUBNET
" together in a configuration file.
190
Administrator Guide
Document Version 2012-06
5.4.1 IP Settings
Summary of Contents for KX-UT248-B
