Value Range
Max. 63 characters
Note
•
You cannot leave this field empty.
•
If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
Default Value
{MODEL}
Configuration File Reference
Domain Name Server
Description
Selects whether to receive DNS server addresses automatically or to
assign a DNS server addresses (up to 2) manually.
Note
•
This setting is available only when
[Connection Mode]
is set
to
[DHCP]
.
Value Range
•
Receive DNS server address automatically
•
Use the following settings
–
DNS1
–
DNS2
Note
•
If you select
[Use the following settings]
, specify the IP
address(es) of the primary and, if necessary, secondary DNS
server(s) manually. The permissible values are:
Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Default Value
Receive DNS server address automatically
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 19)
Configuration File Reference
4.3.1.3 Static Settings
Static IP Address
Description
Specifies the IP address for the unit.
Note
•
This setting is available only when
[Connection Mode]
is set
to
[Static]
.
Value Range
Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Default Value
Not stored.
Document Version 2012-06
Administrator Guide
79
4.3.1 Basic Network Settings
Summary of Contents for KX-UT248-B
