Panasonic KX-UTG200 Setup Manual Download

Page: 388 / 412

to the Syslog server. Syslog servers can manage analysis and debugging of messages from various devices
and platforms.

Related configuration file parameters

•

SYSLOG_ADDR (Page 250)

•

SYSLOG_PORT (Page 251)

•

SYSLOG_SERVER_ENABLE (Page 251)

•

SYSLOG_SEVERITY (Page 251)

Log Level Settings

Log Level Settings (

see Page 198) is used to specify the type and class of logs uploaded to the server.

7.2.2 Log Display

Log Display (

see Page 214) is used to specify the type and class of logs and then display the specified logs.

7.2.3 Log Dump

Log Dump (

see Page 216) is used to export the "Console.log" log file. The "Console.log" log file can also

be exported to a USB flash drive connected to a KX-UTG300. "Console.log" log files can be exported to a USB
flash drive with the steps below.

Connect a USB flash drive to the USB port.

On the Home screen, select

Select "Basic Phone Settings", and then press

[ENTER]

Select "USB", and then press

[ENTER]

Select "Export Log", and then select

Export

7.2.4 System Dump

System Dump (

see Page 217) is used to export the unit's running information, such as the IP address

obtained from DHCP server, CDP/LLDP settings, and DHCP options. For details about the System Dump
function, consult your phone system dealer.

388

Administrator Guide

Document Version 2015-01

7.2.4 System Dump

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Search results

Summary of Contents for KX-UTG200

Reviews:

Related manuals for KX-UTG200

Brands by name

Popular brands

Panasonic KX-UTG200, Setup Manual

Search results

Summary of Contents for KX-UTG200

Reviews:

Related manuals for KX-UTG200

Brands by name

Popular brands