Auto Answer
Description
Specifies whether auto answer is enabled or disabled.
Value Range
•
Yes
•
No
Default Value
No
4.6.2.4 Call Forward
Unconditional (Enable Call Forward)
Description
Selects whether to forward all incoming calls to a specified destination.
Note
•
If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected
[Yes]
for this setting.
•
If you have selected
[Yes]
for this setting and Call Forward has
been enabled on the server, but the forwarding destinations
differ, incoming calls are forwarded to the destination set on the
server.
•
If Call Forward has been enabled on the server, incoming calls
are forwarded to the destination set on the server, even if you
have selected
[No]
for this setting.
•
You can synchronize the Do Not Disturb and Call Forward
settings from the Web user interface (
®
see
[Feature Key
Synchronization]
) or through
configuration file programming (
®
see
"
FWD_DND_SYNCHRO_ENABLE
).
•
If you change this setting when
[Feature Key
Synchronization]
is set to
[Yes]
, the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Value Range
•
Yes
•
No
Default Value
No
Unconditional (Phone Number)
Description
Specifies the phone number of the destination to forward all incoming
calls to.
Note
•
If you change this setting when
[Feature Key
Synchronization]
is set to
[Yes]
, the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Document Version 2014-04
Administrator Guide
129
4.6.2 Call Control [Line 1]–[Line n]
Summary of Contents for KX-UTG200
Page 188: ...188 Administrator Guide Document Version 2014 04 4 9 4 Sniffer Dump...
Page 284: ...284 Administrator Guide Document Version 2014 04 5 8 SSH Settings...
Page 302: ...302 Administrator Guide Document Version 2014 04 7 5 SSH Settings Debug Settings...
Page 303: ...Index Document Version 2014 04 Administrator Guide 303...
