Value Range
Max. 1024 characters
Note
•
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>".
–
"<user>" must be less than 127 characters.
–
"<password>" must be less than 127 characters.
–
"<user>:<password>@" may be empty.
–
":<port>" can be omitted if you do not need to specify the
port number.
•
If "{mac}" is included in this URL, it will be replaced with the
unit’s MAC address in lower-case.
•
If "{MAC}" is included in this URL, it will be replaced with the
unit’s MAC address in upper-case.
•
If "{MODEL}" is included in this URL, it will be replaced with the
unit’s model name.
•
If "{fwver}" is included in this URL, it will be replaced with
"
FIRM_VERSION
" depending on the system. Note that this rule
differs from other parameters such as "
SIP_USER_AGENT
".
Default Value
Empty string
Web User Interface Reference
FIRM_UPGRADE_AUTO
Value Format
Boolean
Description
Specifies whether to display a confirmation message asking the user
to perform a firmware update (manual) or perform the firmware update
without asking the user (automatic) when the unit detects a newer
version of firmware.
Value Range
•
Y
(Enable automatic firmware update)
•
N
(Disable automatic firmware update)
Default Value
Y
5.3.6 Provisioning Settings
PROVISION_ENABLE
Value Format
Boolean
Description
Specifies whether to enable auto provisioning.
Value Range
•
Y
(Enable auto provisioning)
•
N
(Disable auto provisioning)
Default Value
Y
Web User Interface Reference
Enable Provisioning (Page 160)
Document Version 2014-04
Administrator Guide
211
5.3.6 Provisioning Settings
Summary of Contents for KX-UTG200
Page 188: ...188 Administrator Guide Document Version 2014 04 4 9 4 Sniffer Dump...
Page 284: ...284 Administrator Guide Document Version 2014 04 5 8 SSH Settings...
Page 302: ...302 Administrator Guide Document Version 2014 04 7 5 SSH Settings Debug Settings...
Page 303: ...Index Document Version 2014 04 Administrator Guide 303...
