1.1.5 Web User Interface Programming
After connecting the unit to your network, you can configure the unit’s settings by accessing the Web user
interface from a PC connected to the same network. For details, see
.
Router
Switching
Hub
SIP Phone
PC
1.1.5.1 Password for Web User Interface Programming
To program the unit via the Web user interface, a login account is required. There are 2 types of accounts, and
each has different access privileges.
•
User:
User accounts are for use by end users. Users can change the settings that are specific to the unit.
•
Administrator:
Administrator accounts are for use by administrators to manage the system configuration.
Administrators can change all the settings, including the network settings, in addition to the settings that
can be changed from a User account.
A separate password is assigned to each account.
For details, see
Access Levels (IDs and Passwords)
1.1.5.2 Before Accessing the Web User
.
Notice
•
You should manage the passwords carefully, and change them regularly.
•
The settings that can be accessed may be limited by the configuration file programming.
1.1.5.2 Before Accessing the Web User Interface
Recommended Environment
This unit supports the following specifications:
HTTP Version
HTTP/1.0 (RFC 1945), HTTP/1.1 (RFC 2616)
Authentication Method
Digest (or Basic)
Document Version 2014-04
Administrator Guide
25
1.1.5 Web User Interface Programming
Summary of Contents for KX-UTG200
Page 188: ...188 Administrator Guide Document Version 2014 04 4 9 4 Sniffer Dump...
Page 284: ...284 Administrator Guide Document Version 2014 04 5 8 SSH Settings...
Page 302: ...302 Administrator Guide Document Version 2014 04 7 5 SSH Settings Debug Settings...
Page 303: ...Index Document Version 2014 04 Administrator Guide 303...
