Value Range
Max. 64 characters
Note
•
An empty string is not allowed.
•
If "{mac}" is included in this parameter, it will be replaced with
the unit’s MAC address in lower-case.
•
If "{MAC}" is included in this parameter, it will be replaced with
the unit’s MAC address in upper-case.
•
If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
•
If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Default Value
Panasonic_{MODEL}/{fwver} ({mac})
Web User Interface Reference
HTTP_SSL_VERIFY
Value Format
Integer
Description
Specifies whether to enable the verification of the root certificate.
Value Range
•
0 (No verification of root certificate)
•
1 (Simple verification of root certificate)
•
2 (Precise verification of root certificate)
Note
•
If set to "0", the verification of the root certificate is disabled.
•
If set to "1", the verification of the root certificate is enabled. In
this case, the validity of the certificate’s date, certificate’s chain,
and the confirmation of the root certificate will be verified.
•
If set to "2", precise certificate verification is enabled. In this
case, the validity of the server name will be verified in addition
to the items verified when "1" is set.
•
If the unit has not obtained the current time, verification will not
be performed irrelevant of this setting. In order to perform
verification it is necessary to first set up the NTP server.
Default Value
0
5.4.6 Time Adjust Settings
NTP_MODE
Value Format
Integer
Description
Specifies the NTP synchronization mode.
224
Administrator Guide
Document Version 2014-04
5.4.6 Time Adjust Settings
Summary of Contents for KX-UTG200
Page 188: ...188 Administrator Guide Document Version 2014 04 4 9 4 Sniffer Dump...
Page 284: ...284 Administrator Guide Document Version 2014 04 5 8 SSH Settings...
Page 302: ...302 Administrator Guide Document Version 2014 04 7 5 SSH Settings Debug Settings...
Page 303: ...Index Document Version 2014 04 Administrator Guide 303...
