Description
Specifies the pattern, in milliseconds, of Dial Tone 4 (stutter dial tones)
to notify that a voice mail is waiting, using up to 22 whole numbers (off
1, on 1, off 2, on 2…) separated by commas.
Note
•
It is recommended that you set a value of 560 milliseconds or
more for the first value (off 1).
Value Range
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
Default Value
560,100,100,100,100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100,100,0
Web User Interface Reference
REORDER_TONE_FRQ
Value Format
Comma-separated Integer
Description
Specifies the dual-tone frequencies, in hertz, of reorder tones using 2
whole numbers separated by a comma.
Value Range
0, 200–2000 (0: No tone)
Default Value
480,620
Web User Interface Reference
REORDER_TONE_GAIN
Value Format
Integer
Description
Specifies the gain, in decibels, of the reorder tone.
Value Range
(-80)–0
Default Value
0
REORDER_TONE_RPT
Value Format
Boolean
Description
Specifies whether the reorder tone is repeated.
Value Range
•
Y (Repeat)
•
N (No Repeat)
Default Value
Y
240
Administrator Guide
Document Version 2014-04
5.5.5 Tone Settings
Summary of Contents for KX-UTG200
Page 188: ...188 Administrator Guide Document Version 2014 04 4 9 4 Sniffer Dump...
Page 284: ...284 Administrator Guide Document Version 2014 04 5 8 SSH Settings...
Page 302: ...302 Administrator Guide Document Version 2014 04 7 5 SSH Settings Debug Settings...
Page 303: ...Index Document Version 2014 04 Administrator Guide 303...
