Entering Characters
In the Web user interface, when specifying a name, message, password, or other text item, you can enter any
of the ASCII characters displayed in the following table.
However, there are additional limitations for certain types of fields as follows:
•
IPv4 Address field
–
You can enter the IP address using dotted-decimal notation (i.e., "n.n.n.n" where n=0–255).
–
You cannot enter invalid IP addresses, for example, "0.0.0.0", "255.255.255.255", or "127.0.0.1".
•
IPv6 Address field
–
You can enter the IPv6 address using eight groups of four hexadecimal digits separated by colons (i.e.,
"2001:b021:70:2685:1000:8a2e:0370:7335").
–
Some examples of invalid addresses include "::", "0::0", "0::1", and "FF01::101".
•
Authentication ID/Password field
–
The field cannot contain ", &, ', :, <, >, or space.
–
The length of user password and administrator password must be from 6 to 16 characters.
Result Messages
When you click
[Save]
after changing the settings on the current configuration screen, one of the following
messages will appear in the current configuration screen:
Result Message
Description
Save Complete!
The operation has successfully completed.
Failed (Parameter Error)
The operation failed because some specified values are out of range
or invalid.
Document Version 2014-04
Administrator Guide
29
1.1.5 Web User Interface Programming
Summary of Contents for KX-UTG200
Page 188: ...188 Administrator Guide Document Version 2014 04 4 9 4 Sniffer Dump...
Page 284: ...284 Administrator Guide Document Version 2014 04 5 8 SSH Settings...
Page 302: ...302 Administrator Guide Document Version 2014 04 7 5 SSH Settings Debug Settings...
Page 303: ...Index Document Version 2014 04 Administrator Guide 303...
