Account
Target User
ID
(default)
Password
(default)
Password Restrictions
User
End users
user
userpass
•
When logged in as User, you can
change the password for the
User account (
®
•
The password can consist of 6 to
16 ASCII characters
(case-sensitive) (
®
see
in
1.1.5.3 Accessing the Web
User Interface
Administrator
Network
administrators,
etc.
admin
adminpass
•
When logged in as Administrator,
you can change the password for
both the User and Administrator
accounts (
®
see
•
The password can consist of 6 to
16 ASCII characters
(case-sensitive) (
®
see
in
1.1.5.3 Accessing the Web
User Interface
Notice
•
Only one account can be logged in to the Web user interface at a time. If you try to access the Web
user interface while someone is logged in, you will be denied access.
•
The IDs can be changed through configuration file programming (
®
see "
ADMIN_ID
" and
"
USER_ID
).
1.1.5.3 Accessing the Web User Interface
The unit can be configured from the Web user interface.
To access the Web user interface
1.
Open your Web browser, and then enter "http://" followed by the unit’s IPv4 address into the address field
of your browser. If IPv6 address are used on the unit, enter "http://[IPv6 IP address]".
Note
•
To determine the unit’s IP address, perform the following operations on the unit:
1.
On the Home screen, select
.
2.
Select "Information Display", and then press
[ENTER]
.
3.
Select "IP Address" or "IPv6 Address".
2.
For authentication, enter your ID (user name) and password, and then click
OK
.
Notice
•
The default ID for the User account is "user", and the default password is "userpass".
•
The default ID for the Administrator account is "admin", and the default password is "adminpass".
3.
The Web user interface window is displayed. Configure the settings for the unit as desired.
Document Version 2015-01
Administrator Guide
33
1.1.5 Web User Interface Programming
Summary of Contents for KX-UTG200
