•
The information confirmation screen is
displayed.
Note
•
Clicking
"Click to Show next Terminal
IDs"
displays more Terminal IDs available
for use. You can repeat this operation up to
5 times. Once you click
"Click to Show
next Terminal IDs"
, Terminal IDs that have
been displayed up to that point cannot be
recalled.
8.
Click
"Register"
.
•
The value displayed on the screen in
"Registration Key"
(16 characters) must be
registered to the unit. Make a printout of the
page or write down the Registration Key on the
activation key or another piece of paper and
store it in a safe place.
IMPORTANT
•
If you misplace the Registration Key
information, refer to "To display the
Registration Key again (using a computer)
(Page 167)".
9.
Click
"Menu"
.
•
The function selection screen is displayed.
To display the Registration Key
again (using a computer)
If you misplace the Registration Key information, you
can display it again by following the procedure below.
1.
From a computer, access the KX-VC Series NAT
Traversal Service registration page
(https://www2.tsunagarunet.com/hdcom/main).
•
The login screen is displayed.
Note
•
The login screen is displayed in English.
You can change the language from the
drop-down list in the upper right of the
screen.
2.
Enter the characters displayed in the image, and
then click
"here"
at the bottom of the screen.
•
The unit information login screen is displayed.
Note
•
The fields are case sensitive.
3.
Fill in the following items:
"Type"
: select HDVC
"MPR ID"
Document Version 2018-01
User Manual
167
Using the KX-VC Series NAT Traversal Service
