–
"None"
: No features have been
activated.
2.
Press
[G]
.
•
The registration key input screen is displayed.
3.
Enter the 16-digit registration key.
4.
Press
[G]
.
•
A dialogue box to confirm the saving of settings
and system restart after saving is displayed.
5.
Use
[
][
]
to select
"Yes"
and press
[ENTER]
.
•
The system will automatically restart to reflect
changes to system settings.
Note
•
If the registration key you entered is invalid,
"Failed Registration Key code
authentication."
is displayed. Repeat the
procedure from step
. If this message is
displayed even when you have correctly
input the registration key that was issued,
contact your dealer.
•
Only one registration key can be registered
at once. To register multiple registration
keys for enabling multiple features, a restart
is necessary for each registration.
•
Activated features can also be checked on
the enhanced feature confirmation screen
(Page 133).
Updating Software
Note
•
If you want to update software using a USB
memory device, consult your dealer.
•
When updating software using a USB memory
device, note the following.
–
Save the software update file in the root
directory of the USB memory device.
–
Do not change the name of the software
update file.
–
Connect the USB memory device to the
USB jack on the back of the unit ahead of
time.
1.
Select
"Software update"
and press
[ENTER]
.
•
The software update screen is displayed.
2.
Use
[
][
]
to select
"Update Method"
and press
[ENTER]
.
3.
Use
[
][
]
to select
"Network"
or
"USB"
and
press
[ENTER]
.
–
"Network"
: Updates the software from the
network.
–
"USB"
: Updates the software from a USB
memory device.
Note
•
If you want to select
"USB"
, contact your
dealer for the details.
4.
When "Automatic Version Check" is set to
"ON" (Page 141):
The latest software version is displayed next to
"Available Software version :"
. Proceed to step
if there is an update available.
When "Automatic Version Check" is set to
"OFF" (Page 141) or when "Update Method" is
set to "USB" in step 3:
Use
[
][
]
to select
"Version Confirmation"
and press
[ENTER]
.
•
The system checks for version updates. The
latest software version will be displayed next to
"Available Software version :"
. Proceed to
step
if there is an update available.
5.
Use
[
][
]
to select
"Update Software Now"
and press
[ENTER]
.
•
A dialogue box to confirm the updating of your
software is displayed.
Note
•
Please carefully read and confirm the
cautions in the dialogue box before
proceeding to the next step.
6.
Use
[
][
]
to select
"Yes"
and press
[ENTER]
.
•
The update is automatically downloaded and
installed.
•
To complete the update, the system will
automatically restart. Before restart, a message
will be displayed as detailed below.
Document Version 2018-01
User Manual
159
Contacts and Settings
