Press
[G]
.
•
The multicast target screen is displayed.
Note
•
Only IPv4 addresses can be used for the multicast feature.
When "Contact list" is selected
•
The contact list screen is displayed.
Use
[
][
]
to select the other party to register and press
[ENTER]
.
•
The multicast target screen is displayed.
Note
•
To continue registering multicast targets, repeat the procedure from step
•
Register multicast targets starting from the lowest available node ID. The node ID of a
""Not
Registered""
target cannot be selected for registration if it is not the lowest available number.
7.
Press
[G]
.
•
A dialogue box to confirm the saving of settings is displayed.
8.
Use
[
][
]
to select
"Yes"
and press
[ENTER]
.
•
The multicast tree screen is displayed.
Note
•
To continue registering multicast trees, repeat steps
of the procedure.
Editing Registered Contents
1.
of "Administrator Menu List (Page 136)", select
"Multicast Tree Set."
and press
[ENTER]
.
•
The multicast tree screen is displayed.
2.
Use
[
][
]
to select the multicast tree to edit.
3.
Press
[B]
.
•
The multicast tree setting screen is displayed.
4.
Use
[
][
]
to select the item to edit, and then edit it.
5.
Press
[G]
.
•
A dialogue box to confirm the saving of settings is displayed.
6.
Use
[
][
]
to select
"Yes"
and press
[ENTER]
.
•
The multicast tree screen is displayed.
178
User Manual
Document Version 2018-01
Using Multicast
