Part Names and Usage
Main Unit (Front)
A
B
D
E
C
Power LED
Shows the power status. The LED is green or red when power is being supplied from the AC adaptor, and
off when power is not being supplied.
Remote Control Signal Receiver
Receives Remote Control signals. The maximum range of reception is approximately 8 m (26.2 ft) from
front of the unit, and approximately 3 m (9.8 ft) from 20° on each side, total 40°.
Headset Input-Output Terminal
Used to connect a headset to the unit (Page 34).
Note
•
If a headset is connected, audio from the other party can be heard through the headset. Audio is
not played through the display or speakers. However, if
"Output local site sound"
is set to
"HDMI"
, audio is output via HDMI, not the headset (Page 152).
•
If a headset is connected, how audio is sent to the other party differs depending on the type of
devices connected as follows:
Connected Device
Audio Sent to Other Party
Boundary Microphone
Audio is picked up only by the headset microphone. Audio
is not picked up by the Boundary Microphones.
General-purpose microphone
Both the general-purpose microphones and the headset
microphone pick up audio.
Boundary Microphone and
general-purpose microphone
Both the general-purpose microphones and the headset
microphone pick up audio. The Boundary Microphones do
not pick up audio.
Power button
Turns the power on and off (Page 40).
Status LED
Shows the operational status of the unit (Page 27).
22
User Manual
Document Version 2018-01
Preparation
