Changing the Settings for Audio Mixing Sites (Main
Site Only)
When
"Other Site's Audio"
is set to
"Mix (Selection)"
, you can change the audio settings for sites whose
audio is mixed together. (Page 81, Page 108)
Note
•
When using a KX-VC1000 that has not been expanded for 4 Point Built-in MCU support,
"Audio Mixing
Site"
is not displayed in the communication menu.
1.
Press
[MENU]
.
•
The communication menu screen is displayed.
2.
Use
[
][
][
][
]
to select
"Audio Mixing Site"
and press
[ENTER]
.
•
Audio mixing site setting dialogue box is displayed.
3.
Use
[
][
]
to select the sites whose audio will be mixed together and press
[ENTER]
.
•
Press
[ENTER]
to select/deselect the desired sites. You can select up to 4 sites.
4.
Use
[
][
]
to select
"Done"
and press
[ENTER]
.
Note
•
This setting is only available when
"Other Site's Audio"
in the communication menu (Page 81) or
"Other Site's Audio"
in the profile setup (Page 108) is set to
"Mix (Selection)"
.
Starting and Stopping Recording
You can start and stop recording during a video conference call. The recorded video and audio are saved on
the USB memory device connected to the back of the unit.
Note
•
For details about recording features, refer to "Using USB Recording Features (Page 183)".
•
You can also start and stop recording while idle (Page 132).
1.
Press
[MENU]
.
•
The communication menu screen is displayed.
2.
Use
[
][
][
][
]
to select
"USB Rec"
and press
[ENTER]
.
•
The dialogue box to start or stop recording is displayed.
3.
Use
[
][
]
to select
"Yes"
or
"No"
and press
[ENTER]
.
When not recording
–
Selecting
"Yes"
starts recording.
–
Selecting
"No"
does not start recording.
82
User Manual
Document Version 2018-01
During Video Conference Calls
