Starting a Multicast
Starting a Multicast
Select a multicast tree from the list of up to 10 preset multicast trees (1–10) and start the multicast.
1.
of "Administrator Menu List (Page 116)", select
"Multicast Tree Set."
and press
[ENTER]
.
•
The multicast tree screen is displayed.
2.
Use
[
][
]
to select the multicast tree to use for the multicast.
3.
Press
[START]
.
•
The multicast preparation screen is displayed, and when connection confirmations for lower-level
terminals are completed, the multicast will start.
Note
•
If
[END]
is pressed during multicast preparation, the multicast will be cancelled.
•
If no response is received from a lower-level terminal for a connection confirmation for
approximately 1 minute, the multicast tree will adjust and then the multicast will start.
4.
To end the multicast, press
[END]
.
Starting a Multicast by Selecting the Multicast Target
Select a multicast target from the multicast target list registered in advance to the multicast tree, and start the
multicast.
1.
of "Administrator Menu List (Page 116)", select
"Multicast Tree Set."
and press
[ENTER]
.
•
The multicast tree screen is displayed.
2.
Use
[
][
]
to select the multicast tree to use for the multicast, and press
[B]
.
•
The multicast tree setting screen is displayed.
152
User Manual
Document Version 2015-08
Using Multicast
