Calling by Entering an Address Directly
When using IP mode, you can make a video conference call by entering the IP address (or host name), SIP
URI (or SIP user name), H.323 extension, H.323 name, or MCU’s conference room number@IP address.
When using NAT Traversal mode, you can make a call by entering the connection number.
1
Press
[MENU]
.
•
The Menu screen is displayed.
1
9
10
2-5,
7-8
6
2
Select
"Manual Dial"
using
[
][
]
and press
[ENTER]
.
•
The manual dial screen is displayed.
Note
•
You can display the manual dial screen by
pressing
[START]
in the Home screen instead
of performing steps
3
Use
[
][
]
to select the connection mode you want to
input (
"Connection mode 1"
to
"Connection mode
9"
) and press
[ENTER]
.
4
Use
[
][
]
to select the connection mode (
"IP Mode
(SIP)"
,
"IP Mode (H.323)"
,
"NAT Traversal Mode"
).
5
Use
[
][
]
to select the site (
"Site 1"
to
"Site 9"
).
6
When using IP mode, enter the IP address (or host
name), SIP URI (or SIP user name), H.323 extension,
H.323 name, or MCU’s conference room number@IP
address. When using NAT Traversal mode, enter the
connection number (7 digits).
Note
•
When starting multiple-party video conference
calls, repeat steps
•
When calling more than 4 parties, press
[R]
to
display the next page.
7
Use
[
][
]
to select
"Outgoing Bandwidth / Site"
and press
[ENTER]
on the first page.
8
Use
[
][
]
to select the outgoing bandwidth/site to be
used (
"Not Specified"
,
"256 kbps"
–
"18 Mbps"
). (The
default maximum selectable value:
"9.0 Mbps"
)
52
User Manual
Document Version 2015-08
Starting a Video Conference
