–
"OFF"
: Do not allow camera operations using
the remote control.
"Direct Cam Ctrl on Home Screen"
: Use
[
]
[
]
to select whether camera operation by remote
control is enabled when not in a video conference
call.
–
"ON"
(default): Allow camera operations using
the remote control.
–
"OFF"
: Do not allow camera operations using
the remote control.
"Pan Direction"
: Use
[
][
]
to select the
direction in which the video camera will move when
the buttons on the remote control are pressed.
–
"Normal"
(default): The video camera will
move in the left/right direction, as viewed from
the video camera.
–
"Reversed"
: The video camera will move in the
left/right direction, as viewed from the subject.
"FIX Cam's Remote Ctrl Rcvr"
: Use
[
][
]
to
select whether the FIX camera or the unit will
receive commands from the remote control.
–
"ON"
: The FIX camera will receive commands
from the remote control.
–
"OFF"
(default): The unit will receive
commands from the remote control.
Note
•
If a FIX camera is not connected or
depending on the model of the FIX camera,
the unit will receive commands from the
remote control even if
"ON"
is selected.
"Layout change camera control"
: Use
[
][
]
to
select whether the layout will change while the
camera is being controlled.
–
"ON"
(default): The layout will change.
–
"OFF"
: The layout will not change.
3.
Press
[G]
.
•
A dialogue box to confirm the saving of settings
is displayed.
4.
Use
[
][
]
to select
"Yes"
and press
[ENTER]
.
•
The system settings screen is displayed.
Making Language Settings
1.
Select
"Language Setting"
and press
[ENTER]
.
•
The language settings screen is displayed.
2.
Press
[ENTER]
and use
[
][
]
to select the
desired language.
Note
•
The language you can select is as follows:
"English"
: English (default),
"Deutsch"
:
German,
"Français"
: French,
"Italiano"
:
Italian,
"Español"
: Spanish,
"Nederlands"
: Dutch,
"Português"
:
Portuguese,
"
"
: Japanese,
"Русскийязык"
: Russian,
"
ㅔԧЁ᭛
"
:
Chinese
3.
Press
[ENTER]
.
4.
Press
[G]
.
•
A dialogue box to confirm the saving of settings
is displayed.
5.
Use
[
][
]
to select
"Yes"
and press
[ENTER]
.
•
The system settings screen is displayed in the
selected language.
Note
•
If you accidentally choose the wrong
language, follow the steps below to change
the language setting.
1.
Press
[HOME]
.
2.
Press
[MENU]
.
3.
Press
[
]
four times to select the fifth
item from the top, press
[ENTER]
.
4.
Press
[
]
twice.
•
The second page is displayed.
5.
Press
[
]
to select the second item
from the top, press
[ENTER]
.
•
The language settings screen is
displayed.
6.
Repeat the procedure from step
Using Multicast
Refer to "Using Multicast (Page 145)".
Display Unit Information
You can view the setting information for the unit.
Document Version 2015-08
User Manual
113
Contacts and Settings
