–
"Other / Content"
: Displays the image of the
other party using HDMI1, and your own site’s
shared contents using HDMI2.
–
"Content / Content"
: Displays the image of
your own site’s shared contents using HDMI1
and HDMI2.
"Output of HDMI 3"
(KX-VC1600 only): Press
[ENTER]
and use
[
][
]
to select the output to
HDMI3.
–
"Local site video"
(default): Outputs your own
site’s image to HDMI3.
–
"Rec (HDMI 1 / LR-Split)"
: Split the signals of
HDMI1 for video and audio recording,
outputting L (other sites’ audio) and R (your own
site’s audio) to HDMI3.
–
"Rec (HDMI 1 / LR-Mix)"
: Combine the signals
of HDMI1 for video and audio recording,
outputting L (other sites’ audio) and R (your own
site’s audio) to HDMI3.
–
"Rec (HDMI 2 / LR-Split)"
: Split the signal of
HDMI2 for video and audio recording,
outputting L (other sites’ audio) and R (your own
site’s audio) to HDMI3.
–
"Rec (HDMI 2 / LR-Mix)"
: Combine the signals
of HDMI2 for video and audio recording,
outputting L (other sites’ audio) and R (your own
site’s audio) to HDMI3.
Note
•
When your own site’s image is selected,
use the video camera at a resolution of
1080p/1080i. 720p cannot be used.
"Analog compo. video output"
(KX-VC1600
only): Press
[ENTER]
and use
[
][
]
to select
settings for analogue component output.
–
"Same as HDMI 1"
(default): Outputs an
analogue component signal that is the same
image as for HDMI1.
–
"Same as HDMI 2"
: Outputs an analogue
component signal that is the same image as for
HDMI2.
"Max. Resolution"
(KX-VC1600 only): Press
[ENTER]
and use
[
][
]
to select
"1080i"
(default) or
"1080p"
.
Note
•
The set maximum resolution that will be
applied will be for analogue component
output and an HDMI output equivalent to
analogue component.
"Display position of local site"
: Press
[ENTER]
and use
[
][
]
to select the picture-in-picture
display position of your site’s image.
–
"Upper right"
(default): Your image is
displayed at the upper-right part of the screen.
–
"Lower right"
: Your image is displayed at the
lower-right part of the screen.
–
"Upper left"
: Your image is displayed at the
upper-left part of the screen.
–
"Lower left"
: Your image is displayed at the
lower-left part of the screen.
3.
Press
[G]
.
•
A dialogue box to confirm the changing of
settings is displayed.
4.
Use
[
][
]
to select
"Yes"
and press
[ENTER]
.
•
The administrator menu screen is displayed.
128
User Manual
Document Version 2015-08
Contacts and Settings
