"Name"
: Enter a device name for the local site.
"Connection mode"
: Press
[ENTER]
and use
[
][
]
to select a connection mode (
IP Mode
,
NAT Traversal Mode
,
IP / NAT Traversal Mode
)
(default:
"IP Mode"
).
5.
Press
[G]
.
•
A dialogue box to confirm the saving of settings
is displayed.
6.
Use
[
][
]
to select
"Yes"
and press
[ENTER]
.
•
The select local site screen is displayed.
Selecting a Local Site
1.
Press
[MENU]
.
•
The Menu screen is displayed.
2.
Use
[
][
]
to select
"Select local site"
and
press
[ENTER]
.
•
The select local site screen is displayed.
3.
Use
[
][
]
to select the local site you want to use.
Note
•
For the currently selected local site,
"
"
is displayed in
"Selected"
.
•
""Not Registered""
is displayed for sites
that have not been registered.
4.
Press
[G]
.
•
A dialogue box to confirm the use of the
selected local site is displayed.
5.
Use
[
][
]
to select
"Yes"
and press
[ENTER]
.
•
The unit restarts automatically.
Note
•
When changing the connection mode, the time
required for a restart may depend on network
conditions.
•
Restarting the unit once more will return the
local site to the basic settings (the first line of
the local site selection settings). To keep the
selection after restarting, set
"Same setting
after restart"
to
"ON"
•
System settings and administrator menu
settings can be performed for each local site.
When settings are changed and saved while the
local site is in the switched status, those settings
will be valid only when that local site is selected.
Deleting Local Site Information
1.
Press
[MENU]
.
•
The Menu screen is displayed.
2.
Use
[
][
]
to select
"Select local site"
and
press
[ENTER]
.
•
The select local site screen is displayed.
3.
Use
[
][
]
to select the local site you want to
delete.
4.
Press
[R]
.
•
A dialogue box to confirm deletion is displayed.
5.
Use
[
][
]
to select
"Yes"
and press
[ENTER]
.
•
The select local site screen is displayed.
Document Version 2015-08
User Manual
97
Contacts and Settings
