"H.323"
: Use
[
][
]
to select
"ON"
(default) or
"OFF"
.
Note
•
When
"OFF"
is selected, you cannot use a
gatekeeper and H.460 even if
"ON"
is
selected for
"Gatekeeper"
and
"H.
460"
"Default Call Type"
: Use
[
][
]
to select
"SIP"
(default) or
"H.323"
.
Note
•
The call type that you select here will be
reflected in the information displayed on the
Home screen and in the default value of the
call type when making a video conference
call.
5.
Press
[G]
.
•
A dialogue box to confirm the saving of settings
is displayed.
6.
Use
[
][
]
to select
"Yes"
and press
[Enter]
.
•
The administrator menu screen is displayed.
7.
Press
[Home]
.
•
The Home screen is displayed.
Making SIP Settings
When using a SIP server over an intranet, video
conference calls can be made using SIP URIs (SIP user
name@SIP domain name).
Note
•
These settings can only be made in IP mode
(Page 115) and when
"SIP"
is set to
"ON"
on
the call type settings screen.
•
Video conference calls to an MCU or a
non-Panasonic video conference system
through a SIP server using a SIP URI are not
guaranteed.
•
When connecting to an MCU by entering the
MCU’s conference room number@IP address,
"SIP Server"
and
"Gatekeeper"
must be set to
"OFF"
.
•
If video conference calls cannot be made
because there is a problem with the SIP server,
the SIP settings are incorrect (on the server, or
on the unit), etc.,
"Not registered"
will be
displayed on the Home screen instead of the
SIP user name. In this case, you cannot make
calls using either IP addresses or SIP. Contact
your network administrator.
1.
Log in to the administrator menu (Page 112).
•
The administrator menu screen is displayed.
2.
Press
[
]
.
•
The second page is displayed.
3.
Use
[
][
]
to select
"SIP Settings"
and press
[Enter]
.
•
The SIP setting screen is displayed.
4.
Use
[
][
]
to select the following items for input:
"SIP Server"
: Use
[
][
]
to select
"ON"
or
"OFF"
(default).
Note
•
To communicate using a SIP server,
"ON"
must be selected and
"SIP Server
Address"
,
"SIP Username"
, and
"SIP
Domain Name"
must be set.
•
To select
"ON"
,
"Gatekeeper"
must be set to
"OFF"
.
"SIP Server Address"
: Enter the SIP server’s IP
address (or host name).
Note
•
If the IP address contains 1 or 2 digit
numbers, enter these numbers as they are.
Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
•
The DNS server setting is necessary to
enter host names (Page 97).
•
See Page 40 for details about the
characters that can be input for host names.
116
User Manual
Document Version 2013-09
Contacts and Settings
