Recalling a Registered Preset
During a video conference call, you can set the other party’s PTZ camera’s direction and zoom settings to a
desired position by selecting a preset (pan, tilt, and zoom position) registered in their PTZ camera.
Note
•
You cannot register a preset or recall a registered preset for your own PTZ camera. You can recall the
other party’s preset only if the other party is using a KX-VC300 or KX-VC600 and has registered a
preset. If the other party is using a KX-VC500, you cannot recall a preset of their PTZ camera.
•
For details about compatible PTZ camera models, contact your dealer.
1
Press
[CAM Ctrl]
.
•
The site selection dialogue box is displayed.
Note
•
After the site selection dialogue box is displayed,
if no operations are performed within
approximately 3 seconds, the dialogue box will
disappear.
2
Use
[
][
]
to select the desired site and press
[Enter]
.
•
The camera control screen is displayed.
User Manual
55
Controlling a PTZ Camera
