2.
Use
[
][
]
to select
"Settings"
and press
[Enter]
.
•
The system settings screen is displayed.
3.
Use
[
][
]
to select
"Standby Setting"
and
press
[Enter]
.
•
The screen standby settings screen is
displayed.
4.
Enter the length of time (
0
–
99
) in minutes until the
unit enters screen standby mode (default:
10
).
Note
•
If you set
"0"
, the unit will not enter screen
standby mode automatically. However, if
you press the remote control’s
[Video Out
On/Off]
button, the unit will enter screen
standby mode even if
"0"
is set.
5.
Press
[G]
.
•
A dialogue box to confirm the saving of settings
is displayed.
6.
Use
[
][
]
to select
"Yes"
and press
[Enter]
.
•
The system settings screen is displayed.
7.
Press
[Home]
.
•
The Home screen is displayed.
Making Sound Settings
1.
Press
[Menu]
.
•
The Menu screen is displayed.
2.
Use
[
][
]
to select
"Settings"
and press
[Enter]
.
•
The system settings screen is displayed.
3.
Press
[
]
.
•
The second page is displayed.
4.
Use
[
][
]
to select
"Sound Settings"
and press
[Enter]
.
•
The sound settings screen is displayed.
5.
Use
[
][
]
to select the following items for input:
"Welcome Screen Vol."
: Press
[Enter]
and use
[
][
]
to select the volume level (
"Low"
,
"Medium"
[default] or
"High"
) played at the
start-up.
"Ringback Tone Vol."
: Press
[Enter]
and use
[
][
]
to select the volume level (
"Low"
,
"Medium"
[default] or
"High"
) of an outgoing call
ring.
Note
•
The volume level of the busy tone will be the
same level as the ring back tone.
"Ring Tone Vol."
: Press
[Enter]
and use
[
]
[
]
to select the volume level (
"Low"
,
"Medium"
[default] or
"High"
) of an incoming call
ring.
"Default Sound Lev."
: Use
[
][
]
to select the
volume level (
0
–
20
) at the start of a video
conference call (default:
16
).
"Sound Pre-sets"
: Press
[Enter]
and use
[
]
[
]
to select the tone (
"More Highs"
,
"Standard"
[default],
"More Lows"
,
"Voice"
or
"Music"
) at the start of a video conference call
84
User Manual
Contacts and Settings
