•
When
"ON"
is selected, if the unit receives a
signal from a remote control that has an ID
different from the one specified on the Home
screen, a warning is displayed. Follow the
procedures on the screen to change the remote
control ID.
•
When
"OFF"
is selected, even if the unit
receives a signal from a remote control that has
an ID different from the one specified, no
warning is displayed on the Home screen.
Note
•
If multiple remote controls with assigned
IDs are being used close together, it is
recommended that you select
"OFF"
for
"Check ID mismatch"
.
6.
Press
[G]
.
•
A dialogue box to confirm the saving of settings
is displayed.
7.
Use
[
][
]
to select
"Yes"
and press
[Enter]
.
8.
When "Remote ID enable" is set to
"ON" (Page 87):
The dialogue box for changing the ID of the remote
control is displayed. Proceed to step
Note
•
While the dialogue box is displayed, video
conference calls cannot be received.
When "Remote ID enable" is set to
"OFF" (Page 87):
The system settings screen is displayed. Press
[Home]
to return to the Home screen.
9.
Use the following procedure to change the ID of the
remote control.
1.
Press and hold
[·]
and
[#]
at the same time.
2.
Within 2 seconds after you release the buttons,
press the number (
1
to
3
) corresponding to the
ID that you specified for
"Remote control ID"
–
1
: ID1
–
2
: ID2
–
3
: ID3
10.
Press
[Enter]
.
•
The dialogue box disappears and the remote
control ID of the unit will be saved.
Note
•
If the dialogue box does not disappear,
repeat the procedure above, several times
if necessary. If the dialogue box still does
not disappear, turn the power off and then
back on to cancel the settings. For details,
contact your dealer.
11.
Press
[Home]
.
•
The Home screen is displayed.
Making Language Settings
1.
Press
[Menu]
.
•
The Menu screen is displayed.
2.
Use
[
][
]
to select
"Settings"
and press
[Enter]
.
•
The system settings screen is displayed.
3.
Press
[
]
.
•
The second page is displayed.
88
User Manual
Contacts and Settings
