3.
Use
[
][
]
to select
"Audio Input"
and press
[Enter]
.
•
The audio input settings screen is displayed.
4.
Use
[
][
]
to select the following items for input:
"Echo Canceller"
: Use
[
][
]
to select whether
to enable the echo canceller feature.
–
"ON"
(default): Enables the echo canceller
feature.
–
"OFF"
: Disables the echo canceller feature.
"Auto Gain Control"
: Use
[
][
]
to select
whether to enable the auto gain control feature.
–
"ON"
(default): Enables the auto gain control
feature.
–
"OFF"
: Disables the auto gain control feature.
5.
Press
[G]
.
•
A dialogue box to confirm the saving of settings
is displayed.
6.
Use
[
][
]
to select
"Yes"
and press
[Enter]
.
•
The admin menu screen is displayed.
7.
Press
[Home]
.
•
The Home screen is displayed.
Making HDMI Settings (for
Checking Operation)
Note
•
This setting is for verifying HDMI operation. This
setting does not need to be changed usually.
Making Local Site
Settings
You can register up to 10 local sites. The same unit can
be used in multiple meeting rooms without the need to
change the network settings.
Registering a Local Site
1.
Press
[Menu]
.
•
The Menu screen is displayed.
2.
Use
[
][
]
to select
"Select local site"
and
press
[Enter]
.
•
The select local site screen is displayed.
3.
Use
[
][
]
to select
"Not Registered"
and press
[B]
.
•
The local site settings screen is displayed.
4.
Use
[
][
]
to select the following items for input:
•
The following items are displayed over 2 pages.
To view all the items, press
[R]
to move to the
next page, and press
[B]
to move to the
previous page.
•
If you press
[G]
on the first or second pages, the
settings for both screens will be saved.
Note
•
If any required settings are not specified on
either of the screens, the settings will not be
saved even if you press
[G]
on either of the
screens. Save the settings only after you
have specified all the required settings. The
following settings are required:
User Manual
97
Contacts and Settings
