Note
•
Even if you have selected
"Auto"
, you still
may not be able to acquire an IP address
due to problems such as network
congestion. In this case,
"Address is not
assigned"
is displayed in the upper right of
the Home screen. Contact your network
administrator.
"IP Address"
: Enter the IP address for the local
site.
"Subnet mask"
: Enter the subnet mask.
"Default Gateway"
: Enter the IP address of the
default gateway.
Note
•
"IP Address"
,
"Subnet mask"
, and
"Default Gateway"
can be entered only if
"IP Address"
is set to
"Manual"
.
•
If the value for
"IP Address"
,
"Subnet
mask"
, or
"Default Gateway"
contains 1 or
2 digits numbers, enter these numbers as
they are. Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
"SIP Server"
: Use
[
][
]
to select
"ON"
or
"OFF"
(default).
–
"ON"
: You can communicate using a SIP
server.
–
"OFF"
: You cannot communicate using a SIP
server.
Note
•
If SIP settings have not been configured on
the SIP settings screen, you cannot select
"ON"
(Page 93). For details, contact your
network administrator.
•
When there is a problem with the SIP
server, or when SIP settings are incorrect
(on the server or on the unit), etc., and video
conference calls cannot be made, on the
Home screen the SIP user name is not
displayed, and instead
"SIP is not
registered"
is displayed. In this case, you
cannot make calls using IP addresses as
well as SIP. Contact your network
administrator.
5.
Press
[G]
.
•
A dialogue box to confirm the saving of settings
is displayed.
6.
Use
[
][
]
to select
"Yes"
and press
[Enter]
.
•
The select local site screen is displayed.
7.
Press
[Home]
.
•
The Home screen is displayed.
Selecting a Local Site
1.
Press
[Menu]
.
•
The Menu screen is displayed.
2.
Use
[
][
]
to select
"Select local site"
and
press
[Enter]
.
•
The select local site screen is displayed.
3.
Use
[
][
]
to select the local site you want to use.
Note
•
For the currently selected local site,
"
"
is displayed in
"Selected"
.
•
"Not Registered"
is displayed for sites that
have not been registered.
4.
Press
[G]
.
•
A dialogue box to confirm the temporary use of
the selected local site is displayed.
5.
Use
[
][
]
to select
"Yes"
and press
[Enter]
.
•
The Home screen is displayed.
Note
•
When you select a local site, the name entered
in
"Local site name"
is displayed instead of the
unit name in the unit information.
User Manual
99
Contacts and Settings
